Sample Testing and Monitoring Specifications
- Sample Specification for High Strain Dynamic Testing of Driven Piles (PDA)
- Sample Specification for High Strain Dynamic Testing of Drilled and Cast-in-Place Shafts (PDA-DLT)
- Sample Specification for Blow Counting Device with Depth and Kinetic Energy (E-SAX)
- Sample Specification for Crosshole Sonic Logging (CSL)
- Sample Specification for Low Strain Integrity Testing (PIT)
- Sample Specification of Thermal Integrity Profiling (TIP)
- Sample Specification for Drilled Shaft Base Cleanliness (SQUID)
- Sample Specification for Installation of Augered Cast-In-Place Piles Using Automated Equipment (PIR)
- Sample Specification for SPT Energy Testing (SPT)
ASTM Standards
- D1586 - Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
- D4633 - Standard Test Method for Energy Measurement for Dynamic Penetrometers
- D4945 - Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
- D5882 - Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
- D6066 - Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
- D6760 - Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
- D7949 - Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations
- D8169/D8169M - Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load
Other
- Compliance of CHAMP-XV with ASTM D6760
- Federal Highway Administration Geotechnical Engineering Circular (GEC) #8
- List of Codes, Specifications and Guidelines pertinent to crosshole sonic logging
- Codes, Specifications and Guidelines pertinent to Dynamic Load Testing and Wave Equation Analysis
- ISO 22476-3:2005 - Geotechnical investigation and testing -- Field testing -- Part 3: Standard penetration test