Documentos de referencia

Filter by:

Performance of Pile Driving Hammers

Rausche, F. , Goble, G.

Journal of the Construction Division, Proceedings of the American Society of Civil Engineers, pp 211-218; 1972

Field Demonstration: Response of Instrumented Piles to Driving and Load Testing

Goble, G. , Kovacs, W. , Rausche, F.

Proceedings of the Specialty Conference on Performance of Earth and Earth-Supported Structures, American Society of Civil Engineers, Lafayette, IN, pp 3-38; 1972

A New Testing Procedure for Axial Pile Strength

Rausche, F. , Goble, G. , Moses, F.

Offshore Technology Conference, Houston, TX, pp 633-642; 1971

Dynamic Studies on the Bearing Capacity of Piles; Phase III Volume I Report No. 48

Goble, G. , Rausche, F. , Moses, F.

Division of Solid Mechanics Structures and Mechanical Design School of Engineering Case Western Reserve University, Cleveland, OH; 1970

Dynamic Studies on the Bearing Capacity of Piles; Phase III Volume II Report No. 48

Goble, G. , Rausche, F. , Moses, F.

Division of Solid Mechanics Structures and Mechanical Design School of Engineering Case Western Reserve University, Cleveland, OH; 1970

Pile Load Test by Impact Driving

Goble, G. , Rausche, F.

Highway Research Record No. 333, Washington, D.C., pp 123-129; 1970

Dynamic Studies on the Bearing Capacity of Piles; Phase II Volume I Report No. 31

Goble, G. , Tomko, J. , Rausche, F. , Green, P.

Division of Solid Mechanics Structures and Mechanical Design School of Engineering Case Western Reserve University, Cleveland, OH; 1968

Dynamic Studies on the Bearing Capacity of Piles; Phase II Volume 2 Report No. 31

Goble, G. , Tomko, J. , Rausche, F. , Green, P.

Division of Solid Mechanics Structures and Mechanical Design School of Engineering Case Western Reserve University, Cleveland, OH; 1968

Dynamic Studies on the Bearing Capacity of Piles, Final Project Report, Volume 1

Goble, G. , Scanlan, R. , Tomko, J.

Division of Solid Mechanics Structures and Mechanical Design School of Engineering Case Western Reserve University, Cleveland, OH; 1967

Dynamic Studies on the Bearing Capacity of Piles, Final Project Report, Volume 2

Goble, G. , Scanlan, R. , Tomko, J.

Division of Solid Mechanics Structures and Mechanical Design School of Engineering Case Western Reserve University, Cleveland, OH; 1967