GRL
info@pile.com
SAMPLE SPECIFICATIONS
REFERENCE LIBRARY

Confidently monitor, evaluate and measure the integrity of ACIP and CFA piles with PDI’s suite of QA products.

The PDA evaluates shaft integrity, driving stresses and hammer energy when monitoring pile installation.

Pile Driving Analyzer® (PDA) System

The PDA evaluates shaft integrity, driving stresses and hammer energy when monitoring pile installation.
Learn More
CAPWAP is a software program that estimates total bearing capacity of a pile or shaft, as well as resistance distribution along the shaft at the toe.

CAPWAP® (Case Pile Wave Analysis Program)

CAPWAP is a software program that estimates total bearing capacity of a pile or shaft, as well as resistance distribution along the shaft at the toe.
Learn More
TIP evaluates the entire cross-section and length of a deep foundation using heat generated by curing cement to assess quality control and shape evaluation.

Thermal Integrity Profiler (TIP)

TIP evaluates the entire cross-section and length of a deep foundation using heat generated by curing cement to assess quality control and shape evaluation.
Learn More
PIT conducts low strain integrity testing by pule echo or transient response methods.

Pile Integrity Tester (PIT)

PIT conducts low strain integrity testing by pule echo or transient response methods.
Learn More
The PIR is an automated monitoring equipment that assists in the correct installation of ACIP/CFA and DD piles by displaying target vs actual poured concrete volume in real time.

Pile Installation Recorder (PIR)

The PIR is an automated monitoring equipment that assists in the correct installation of ACIP/CFA and DD piles by displaying target vs actual poured concrete volume in real time.
Learn More